Unpacking Instructions; Accessories; Grounding Instructions - Sharp Carousel R-1850A Operation Manual

All manuals and user guides at all-guides.com

UNPACKING INSTRUCTIONS

Unpacking and Examining Your Oven
Carefully remove oven from carton. SAVE THE CARTON
INSTALLATION EASIER.
Remove:
1. all packing materials from inside the oven cavity. Check to see that there are
Installation Instructions, Wall Template and Top
SAVE the Operation Manual.
2. the feature sticker, if there is one, from the outside of the
Check the oven for any damage, such as misaligned or bent
seals and sealing surfaces, broken or loose door hinges and latches and dents inside
the cavity oron the door. If there is any damage, do not operate the oven and contact
your dealer or SHARP AUTHORIZED
See Installation Instructions for more details.

ACCESSORIES

Two accessories are available
1. Charcoal Fitter Kit (RK-220). This is required when hood exhaust is recirculated. See Charcoal Fitter Krt on page 27.
If your dealer does not stock this item, rt can be ordered by calling 1-800-BE-SHARP.
2. Filler Panel Kit. For use when the oven is installed in a 36-inch or 42-inch wide opening. The metal filler panels come in pairs,
each 3.inches wide. For information contact:

GROUNDING INSTRUCTIONS

This appliance must be grounded.
plugged into a wall receptacle that is properly installed and grounded in
codes and ordinances. In the event of an electrical short
wire for the electric current.
WARNING
-Improper use of the grounding plug can result in a risk of electric shock.
Electrical Requirements
Check Installation Instructions for proper location for the power supply.
The electrical requirements are a 120 volt 60 Hz, AC only, 15
electrical supply. It is recommended
provided.
The oven is equipped with a 3-prong grounding plug. It must be plu9g ed into a wall
receptacle that is properly installed
CIRCUMSTANCES CUT OR REMOVE THE GROUNDING PIN FROM THE PLUG.
Note:
If
1. you have any questions about the grounding or electrical instructions, consult a qualified electrician or serviceperson.
2. Nerther Sharp nor the dealer can accept any liability for damage to the oven
the correct electrical connection
Radio or TV Interference
Should there be any interference caused by the microwave oven to your radio or
d~lerent electrical circuit, relocate the radio
antenna.
AS IT MAY
Template. Read enclosures and
door.
door, damaged door
SERVICER.
for this oven:
Modern-Aire Manufacturing
7319 Lankershim Blvd.
North Hollywood,
Phone: (818) 765-9870 or
This oven is equipped with a cord having
circuit, grounding reduces risk of electric shock by providing
amp. or more protected
that a separate circuit serving only the oven be
and qrounded. DO NOT UNDER
procedures.
or TV as far away from the oven as feasible or check position and signal of receiving
4
MAKE
Door
sealing
Corporation
CA 91605
(213) 875-1350 Fax (818) 765-4916
a grounding wire with a groundin9 plug. It
accordance with the National Electrical
3-Prong Plug
~
1
ANY
Grounding Pin
or personal injury resuhing from failure to observe
TV, check that the microwave oven is on a
seals and
surfaces
must be
Code and local
an escape
Ground
Receptacle Box