Selecting A Preset Channel - Sony STR-DA5200ES Operating Instructions Manual

Selecting a preset channel

1
Press TUNER repeatedly to select the
XM Radio.
2
Press PRESET+ or PRESET –
repeatedly to select the preset station
you want.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
You can also press TUNING MODE on the
receiver repeatedly to select "PRESET"
then use TUNING to select the preset
stations you want.
Listening to a Sony digital music
player
For details on how to connect a Sony digital
music player to this receiver, refer to
"Listening to the music of a USB device"
(page 90).
1
Press RECEIVER to enable
receiver operation.
You do not need to press RECEIVER if
the other input buttons do not light up.
2
Press USB repeatedly to select
the Sony digital music player.
Other operations
To Do the following
Press H.
Play
Press X. To resume play, press
Pause
the button again.
Press x.
Stop
Select a folder Press ALBUM + or ALBUM –.
Select a track Press TRACK + or TRACK –.
Hold down m or M during
Find a point in a
track playback, and release the button
at the desired point.
To Do the following
Change a display Press DISPLAY repeatedly. The
text display will change as follows.
Track title t Album title t
Artist title t Genre title t
Sound field type t Volume
Operating the output to zone 2/
zone 3
For details on the connections and settings of
zone 2/zone 3, see "Listening to the sound in
another zone (ZONE 2/ZONE 3 operations)"
(page 102). Use the RM-AAU009 remote for
this operation.
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
1
Turn on the main receiver (this
receiver).
...
2
4
5
continued
113 GB