Sony STR-DA4300ES Operating Instructions Manual page 13

Name Function
S DVD/
Press to display the menus of
TOP MENU,
the DVD player on the TV
MENU screen. Then use V/v/B/b and
to perform a menu
operations (page 122).
NIGHT Press AMP (6), then press
MODE NIGHT MODE to activate the
NIGHT MODE function
(page 71).
INPUT
Press AMP (6), then press
MODE INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks
(page 97).
T MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
U MASTER
Press to adjust the volume level
VOL +/–
of all speakers at the same time.
TV VOL +/– Press TV (e;), then press TV
VOL +/– to adjust the volume
level of the TV.
V DISC SKIP
Press to skip a disc when using
a multi-disc changer.
W RETURN/
Press to return to the previous
EXIT O menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
X DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
Name Function
Y CLEAR
Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
>10
Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
D.TUNING Press to enter direct tuning
mode (page 81, 86).
Z 2CH/
Press to select sound field
A.DIRECT (page 60) or to switch the audio
of the selected input to analog
signal without any adjustment
(page 118).
wj A.F.D.
Press to select sound field
(page 63).
wk SHIFT
Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
wl SLEEP
Press to activate the sleep timer
function and the duration which
the receiver turns off
automatically (page 104).
e; TV
Press to enable the TV
operation.
ea RM SET UP Press to set up the remote.
a)
See the table on page 123 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
13
GB