Remove The Lcd Module; Remove The Heat Sink - Lenovo ThinkBook 13X Hardware Maintenance Manual

"Remove the system board" on page 42
"Remove the pen holder" on page 46
Step 1. Remove one screw and then pry up the fingerprint board holder.
Figure 36. Remove one screw and pry up the fingerprint board holder
Screw specifications
M1.6 x L1.7
Step 2. Remove the fingerprint board.
Figure 37. Remove the fingerprint board
Go to
https://support.lenovo.com/partslookup
part:
Fingerprint board

Remove the LCD module

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the system board mylar" on page 30
"Remove the heat sink" on page 33
48
Hardware Maintenance Manual
Number of screws
1
to look up the Lenovo part number of the following replacement