Device Safety, Configuration, And Maintenance; Safety; Charging; Battery - Quirk Logic Papyr User Manual

Table of Contents

Advertisement

Device Safety, Configuration, and Maintenance

Safety

When storing the device, ensure no sharp or hard edges come into direct contact with
the display.
Never leave the device exposed to high temperature, such as in a car.
• Only operate in the recommended temperature range of 5 °C to 35°C (41 °F to 95 °F)
Do not drop or put any heavy object on top of the device or subject the device to a strong
shock.
Do not subject the device to extremes of light, temperature, moisture, or vibration.
Do not leave the device on an unstable surface.
Do not apply any excessive pressure to the pen tip and/or button during use.
When not in use, put the device in sleep mode or turn it off.
• The device is not waterproof, do not submerge into water or get the device wet.

Charging

Only use the supplied USB cable.
The device may get warm when charging or if it is used for an extended period of time.
Never cover or wrap the device when it is being charged.

Battery

• The Battery icon indicates the percent of remaining battery life.
• A lightning bolt will appear over battery icon to show when the battery is being charged.
• When you are not using the device for an extended period of time, hold down the
(power) button until the screen says "Turn Power Off". Tap "yes" to turn off the device.
• Do not leave the pen on the touchscreen as this will drain the battery.
Copyright © 2021
22

Advertisement

Table of Contents
loading

Table of Contents