TROUBLESHOOTING
Problem
Water is leaking
from the filter.
There is no water
flow.
Possible Causes
The rubber plug may
have fallen off.
The rubber plug is not
installed correctly.
There may be a foreign
object on the rubber
plug.
Filter core sealing
gasket is not installed.
Filter core sealing
gaskets deformed after
installation.
The water level in the
upper barrel may be
too low.
Air may be blocking the
water flow.
http://www.NewAir.com
8
Solution
Install the rubber plug
correctly.
See above.
Clean the rubber plug.
Install the filter core sealing
gasket.
Install the filter core sealing
gaskets again.
Add water to the upper
barrel.
Pat the upper barrel to
remove any trapped air.