Siemens iQ300 Repair Hints page 121

Repair
4.3 Replacing door upper hinge
Required tools:
Torx Bit TX20 6,3 mm (1/4")
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶ Appliance door removal operation should only be carried out by
trained specialists.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶ Wear protective gloves.
Warning
Slipping of tilted appliances!
Bone fractures / crush injuries
▶ Secure appliances against slipping.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Appliance interior fittings are removed.
2021-03-10_9001631453
4.3.1 Removing door upper hinge
1. Place appliance on the back side.
[00340865]
Copyright by BSH Hausgeräte GmbH Page 121 of 529