Advertisement
BT-350
BT-350
Technical Specifications:
Output Power Rating
Gain @ 1kHz
Tone Control Range
Low Boost
Low
Mid
High
High Boost
Graphic EQ Level
Graphic EQ Range
Signal to Noise Ratio
Input Impedance
Maximum Signal Level Accepted
Tube Type:
Effects Loop Level
Power Requirements
Domestic
Export
Size and Weight
CRATE continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
CRATE/SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON AVENUE, ST. LOUIS, MO 63133
All manuals and user guides at all-guides.com
ThunderBass Amplifier
350 watts @ 0.2% THD, 4 ohm load – 120VAC
200 watts @ 0.2% THD, 8 ohm load – 120VAC
61dB, tones at "5"
+8dB @ 20Hz
±13dB @ 40Hz
±11dB @ 260Hz
±15dB @ 5kHz
+10dB @ 10kHz
+8dB, -10dB
±12dB @ 40Hz, 100Hz, 250Hz, 625Hz, 1.6kHz, 4kHz, 10kHz
84dB typical
0dB input: 1M ohm
-15dB input: 122k ohm
0dB input: 2.5V peak to peak
-15dB input: 14V peak to peak
12AX7 (preamp)
1V RMS for full power output
120VAC, 60 Hz, 10A
240VAC, 50 Hz, 5A
5.25"H x 19"W x 15.75"D, 36 lbs.
47-599-02 • 02-96
Advertisement
