Anti Motion Blur - Sony DSC-WX1 Cyber-shot&reg Handbook

Anti Motion Blur

This is suitable for indoor shots without using the flash to reduce the subject blur.
1 Set the mode dial to
2 Fully press the shutter button.
A series of burst shots are taken, and image processing is applied to reduce subject blur and
noise.
Notes
• The shutter sound beeps 6 times and an image is recorded.
• Reducing blur does not effective in the following situations:
– Image with large-scale movement
– Image with a main subject too close to the camera
– Image with little contrast such as sky, sandy beach, or lawn
– Image with constant change such as waves or water falls
• Smile Shutter cannot be used.
• When using a light source that flickers, such as fluorescent lighting, block noise may occur. In these
cases, set Scene Selection to

(Anti Motion Blur).

(High Sensitivity).
26 GB