Removing And Reinstalling The Main Parts - Sharp QT-80W Service Manual

Tape Mechanism Stop/Eject Button
(J1)x4
ø3x10mm
Figure 5-1

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1 to 9 of the disassembly method to remove the
tape mechanism. (See page 4.)
How to remove the record / playback and erase
heads (See Fig. 5-3.)
1. Remove the screws (A1) x 2 pcs., to remove the record/
playback head.
2. Remove the hooks (A2) x 2 pcs., toward the center position
as shown in Fig. 5-3. and then extract the erase head
upward.
Note:
After replacing the heads and
adjustment, be sure to apply screwlock.
How to remove the pinch roller (See Fig. 5-4.)
1. Remove the screw (B1) x 1 pc., and remove the pinch roller
upwards.
All manuals and user guides at all-guides.com
Push
Cassette
Holder
Open
performing the azimuth
– 5 –
Front Cabinet
X-BASS
PWB
Figure 5-2
(A1)x2
ø2x7mm
Hook
(A2)x2
Push
PLAY
Button
Erase Head
Figure 5-3
Pinch Roller
Figure 5-4
QT-80W
(K1)x3
ø2.6x8mm
Lug Wire
Record/Playback
Head
(B1)x1
ø1.5x2.5mm