Ubigate iBG1000 Quick Start Guide
Connecting the Ubigate iBG1000
Connecting to the Network
This section describes how to connect the Ubigate iBG1000 to various
network interfaces. Follow the procedure for the interface appropriate
for your network facility environment.
LAN Interface
The Ubigate iBG1000 accommodates several network connections.
Use a Category 5 (minimum) Ethernet cable with RJ-45 connectors to
connect to the network.
1.
Insert the RJ-45 connector on one end of the cable in any of the
Ethernet ports.
2.
Connect the RJ-45 connector on the other end of the cable to the
designated network. Make sure that the cable connectors are locked
and secure in the ports.
10
© SAMSUNG Electronics Co., Ltd.