Installing The Fixed Stand; Removing The Articulating Stand - Dell OptiPlex 7490 All-In-One Service Manual

Installing the fixed stand

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image provides a visual representation of the fixed stand installation procedure.
Steps
Align and insert the hooks on the mounting bracket on the stand into the slots on the monitor, until you hear a click.
Next steps
1. Follow the procedure in

Removing the articulating stand

Prerequisites
1. Follow the procedure in
CAUTION: When servicing the system, place it on an elevated, clean, and flat surface. It is recommended to
remove the stand to avoid accidental damage to the system display during servicing.
14 Removing and installing components
After working inside your
Before working inside your
computer.
computer.