Anti-Freeze Function; Heating Function - DeLonghi TRD40615E-6A Instructions For Use Manual

Important! Always operate the appliance in upright
position only (wheels on the bottom, controls on top). Any
other position could create hazardous situation.
Location
Place appliance on the floor beneath the coldest window
in the room, or any other location. Your appliance will re-
duce the effect of cold drafts. The appliance should not be
placed immediately below a power outlet. Do not use this
appliance in rooms with a floor area of less than 43 square
feet (4 sq. m.).
Power connection
The appliance must be connected to a properly polarized
household outlet in perfect working condition.
The appliance will be set in the off condition.
The display will show the
or bedding, furniture and flammable material away from the
power outlet where the appliance is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to off.
When the unit is switched on by pressing the on-off button,
the operating conditions will be same ones previously set.
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.

Heating function

To turn the appliance on, insert the plug into an electrical
outlet then press the
Press button (C) to set the required power level:
MIN ( ); MED ( ); MAX (
To select the desired temperature, press button + or - (E
or D). By pushing the + or - button once, the temperature
(shown on the display) will increase or decrease by 1°F or 1°C.
Holding the + or - button depressed the value will increase
o decrease rapidly.
symbol. Keep loose clothing
(B) button.
) (see fig. 2).
Fig. 2
The appliance allows to set a temperature of 41°F (5°C) and a
range from 50°F to 82°F (10°C to 28°C).

Anti-freeze function

Setting the temperature to 41°F (5°C), the appliance will
activate the Antifreeze function. The display will show the
symbol, in this way the appliance will turn on automatically,
at the max power, only if the room temperature falls below
41°F (5°C), to prevent freezing conditions. If you wish to go
back to the Heating function, press the "+" button once.
Note: in this function the power level settings are not able to
be adjusted, unit will run at MAX.
Eco function
When this function is active the appliance automatically sets
the most appropriate power level to guarantee optimum
comfort while reducing energy consumption. To activate this
function press the "ECO" (H) button. The display will show
symbol.
If the selected temperature is much higher then the actual
room temperature, the appliance will start automatically and
rapidly to heat the room.
The appliance will automatically select the most convenient
power level (MAX-MED-MIN-OFF).
If MAX power level has been selected using the
button, the appliance will cycle between: MAX-MED-MIN-
OFF. If MED power level has been selected, the appliance will
cycle between: MED-MIN-OFF.
If MIN power level has been selected, the appliance will cycle
between: MIN-OFF.
Working indicator
The symbol indicates the heating status by means of its
colors.
RED: the unit is heating at the maximum power.
YELLOW: the unit is heating at the medium power.
GREEN: the unit is heating at the minimum power.
absent: the unit is not heating.
Brightness of the display
The appliance allows two different brightness settings for the
display. The highest is active when any key button is pressed.
After a few seconds of keyboard inactivity, the brightness will
decrease to the operating brightness level.
This lower level can be adjusted by means of the light button
(G). Press the light button repeatedly till the desired
brightness is reached (three brightness levels available).
6