Summary of Contents for Pyle SereneLife SLPORBT18
- Page 1 SLPORBT18 Automatic Robotic Pool Cleaner Pool Cleaning Robot with Two Motors, Wall Climbing, Easy to Clean Up to 50 ft.
-
Page 2: Table Of Contents
Please read this User Manual in its entirety to ensure proper operation and care of your SLPORBT18 Automatic Robotic Pool Cleaner. IMPORTANT: PLEASE READ BEFORE OPERATING CLEANER CONTENTS 1. Product Introduction 2. Warning and Cautions 3. Getting Started and Operation Instructions 4. -
Page 3: Product Introduction
Product Introduction We are sure that your SERENELIFE Automatic Robotic Pool Cleaner will provide you with reliable, convenient and cost e ective pool cleaning. Its reliable ltration in all pool conditions, active brushing, and all-surface climbing brush enhance maximum pool hygiene. The Automatic Robotic Pool Cleaner by SERENELIFE deliver advanced cleaning technology, long lasting performance and easy maintenance. -
Page 4: Getting Started And Operation Instructions
GETTING STARTED Turn power supply ON/OFF, error alarm. FLOOR CLEAN ONLY: To clean the pool oor only. It will increase the cleaning e ciency ALL PURPOSE CLEAN: All-around cleaning, including pool oor, pool wall and waterline. RUNNING TIME set the cleaning time): Set the preferred running hours (2/3/5 hours, press the button to set the cleaning time, red light means the cleaner will work for 2 hours, green light for 3 hours, blue for 5 hours), before you start the... - Page 5 2. Connect oating power cord. 3. Place the unit in the water. Release the Pool Cleaner and let it sink to the oor of the pool. Make sure that the oating cable is free of any obstructions. 4. Start: Turn the power supply ON (115V AC 60HZ). One of the three modes light will be on.
-
Page 6: Routine Maintenance
DAILY MAINTENANCE 1. Clean the Filter Basket Cut off the power supply (light goes out) Turn off the Pool cleaner. Open the lter cover. Clean the lter basket with a hose. Insert the clean lter basket and close the lter cover. Make sure the power supply is switched off... -
Page 7: Troubleshooting
2. Floating cable daily maintenance The floating cable may get intertwined after 6 hours of working which need to be sorted out manually. It highly recommend to sort the cable out after each cleaning. TROUBLESHOOTING Symptom Possible Reason Solution The pool cleaner moves but does not clean the Clogged lter basket Clean the lter basket... -
Page 8: Speci Cations
SPECIFICATIONS Features: • Design to Clean the Pool Effortlessly • With Dual Scrubbing Brushes and Superior Filtering Capabilities • Saves Energy • Traps and Locks-in All Sorts of Dirt and Debris • Tangle-Free Cable • Easy to Use • Ideal for In-ground Swimming Pools Up to 50 Feet •... -
Page 9: Parts Breakdown And Replaceable Parts List
Parts Breakdown and Replaceable Parts List Parts Name Cover and wiring assembly Filter Basket Motor box Wheel Brush Buoyancy block Driven wheel Bearing Side panel Controller Box Drive wheel Drive belt www.SereneLifeHome.com... - Page 10 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...