Table of Contents
Advertisement
Top panel
VCO2
1. BALANCE slider
Used to adjust the balance between the sound (VCO1) on the front
panel side and the sound (VCO2) on the top panel side. If the slider
is set to the minimum value, only the sound (VCO1) on the front
panel side is produced. If the slider is set to the maximum value, only
the sound (VCO2) on the top panel side is produced.
2. PITCH slider
(COARSE, FINE)
The COARSE slider can change the pitch on the top panel side
(VCO2) over two octaves. The FINE slider, which has a small variable
range, is used for regular tuning.
3. VCO2mode selector
Used to switch the overlapping between the sound (VCO1) on the
front panel side and the sound (VCO2) on the top panel side.
DUET: Used to add the sound (VCO1) on the front panel side and the
sound (VCO2) on the top panel side. You can obtain deep sounds
such as unison, third, and fifth using the PITCH slider.
MODULATOR 1: Used to obtain the effects of the ring modulator by
combining the sound (VCO1) on the front panel side and the sound
(VCO2) on the top panel side You can create various sounds ranging
from chime, Chinese gong, and gamelan to SFX sounds.
MODULATOR 2: This is a ring modulator that has a different octave
from MODULATOR 1.
MODULATOR 3: Used to produce different tones and random scales
from 37 keys without following the keyboard.
NOISE 1: Used to produce a noise with the musical scale. This
function can be used independently. In addition, you can create
various tones by appropriately mixing with the sound on the front
panel side.
NOISE 2: Used to produce a noise without the musical scale. The
tone can be changed using the Traveler. You can create various
sound effects such as
wind and waves.
4. EFFECT switch
Turn this switch on to mix the sound (VCO2) on the top panel side.
5. SUSTAIN LONG switch
Turn this switch on to decuple the tone attack, percussion, or sustain
time. This function is available for special effects.
6. TRAVEL VIBRATO
Turning this switch on produces the same effects as the vibrato that
is obtained by wagging the Traveler control slider to the left and
right by hand.
18
switch
Advertisement
Table of Contents
