Putting A Call On Hold/Unhold - INNOSTREAM INNO 55 User Manual

INNO 55 User's Guide
icon in the title area of the screen indicates that you are currently on a call.
icon in the title area of the screen indicates that you are in the conference call state. (For
example, 2 active calls or 2 held calls)
The boxed digits in middle place of the title area of the screen indicate the number of the
focused call in the multiple calls state. You can focus to next or previous call by pressing
[NAVI NAVI- - - - RIGHT NAVI NAVI RIGHT] or [NAVI RIGHT RIGHT
In the main area of the screen, you can see the number or name (if stored in the phonebook) and
the call state of the focused call. Depending on your subscription, you may see the remaining
cost in the bottom area of the screen.
The time counter in the bottom area of the screen starts when the call starts and indicates how
long you have been on the call.
! Note: All of the call control options are not always displayed through all calls, necessary ! Note
! Note ! Note
options only will be displayed according to the call state.

5.1 Putting a call on hold/unhold

You can put the current call on hold when the call is active state if this service is supported on
the network.
1. Press [Hold Hold soft key], or select the Hold
Hold Hold
2. To make the held call reactivate, press [Unhold
in the Option Option menu if muted. Option Option
PAGE : 18 of 18
NAVI- - - - LEFT NAVI NAVI LEFT]. LEFT LEFT
Hold option in the Option
Hold Hold
Option menu if muted.
Option Option
Unhold soft key], or select the Un Unhold Unhold
INNOSTREAM Confidential
Unh h h h old Un Un old option old old