Table of Contents
Advertisement
36
English
Warranty and support
Warranty restrictions
Troubleshooting
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
Be careful, the battery strips are sharp.
1 Insert the screwdriver into the slot between
the front and back panel in the bottom of the
appliance. Remove the back panel.
2 Remove the front panel.
3 Unscrew the two screws at the top of the inner
panel and remove the inner panel.
4 Remove the rechargeable battery with a
screwdriver.
If you need information or support, please
visit www.philips.com/support or read the
international warranty leaflet.
The shaving heads (cutters and guards) are not
covered by the terms of the international warranty
because they are subject to wear.
This chapter summarizes the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The appliance is
still attached to the
wall socket. For
safety reasons, the
appliance can only
be used without
cord.
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Advertisement
Table of Contents
