Roland Rd-700Gx Setup - Behringer FCB1010 Using Manual

Using midi foot controller with korg pa2x

Hide thumbs Also See for FCB1010:

Table of Contents

Roland RD-700GX Setup

Create a SETUP as follows:

Turn on SPLIT. Hold down for the SPLIT button for 2 seconds.

Set Split Point = F#3

This will reflect the Split Point Setting of G3 on the Pa2X

You can layer 2 voices on the Upper Keyboard.

You can layer 2 voices on the Lower Keyboard.

Make sure the 2 Red Buttons and the 2 Green Buttons are turned on.

You can adjust the relative volumes of the 4 voices using the sliders.

Using a Behringer FCB1010 with a Korg Pa2X

Table of Contents

Show Quick Links

Table of Contents