Parking Lot Management; System Settings - Motorola MVMS User Manual

Before using parking lot management module, please add ANPR cameras first in the resource management interface.

13.1 System Settings

① Enable the parking lot. Go to HomeParking Lot ManagementSystem menu as shown below. Select Entrances Config tab and then
click the main park. Enable this main parking lot, its sub parking lot and gateway and lane.
② Bind the ANPR cameras. Please bind the ANPR cameras to the activated lane. Choose the ANPR camera and then click
Click [Apply] to bind this camera to the lane. Choose the ANPR camera and then click
Set the corresponding lane of the monitoring window. Then click [Apply] to save the settings. After that, you can go to the vehicle
monitoring interface to view the live images of the left and right lane.
③ Bind LED Screen. Choose the LED screen and then click
the LED screen, please go to HomeResource ManagementLED Display Device interface to add LED screen. In the following
interface, click [Add] and then enter the IP address port of the LED display screen. Click [OK] to save the settings.

13 Parking Lot Management

MVMS Management Server User Manual
to unbind it.
to add it. Click [Apply] to bind this LED screen. Before binding
76
to add it.