Connecting To Shore Power; Shore Power Cable Hoist (If Equipped) - Meridian 441 SEDAN Owner's Manual

Chapter 11: Electrical Systems
• Your yacht is equipped with two (2) 110-volt/30-amp shore power inlets or one (1) 220-volt/50-amp shore
power inlet.
• The 110-volt/30-amp shore power inlets provide 110-volt/30-amp power to each shore power master breaker.
• The 220-volt/50-amp shore power inlet provides 110-volt/50-amp power to each shore power master breaker.
• Dual shore power inlets are labeled LINE 1 and LINE 2, which corresponds to the SHORE POWER 1 and
SHORE POWER 2 master breakers on the 110-volt AC master panel.
• LINE 1 and LINE 2 are independent of each other except when the parallel switch is used.

Connecting to Shore Power

SHOCK and ELECTRICAL SYSTEM DAMAGE HAZARD!
• Monitor the polarity indicator lights EVERY TIME you connect to shore power.
• If a reversed polarity light turns on when you are connecting to shore power, do NOT turn
on the main breaker switches.
• Instead, IMMEDIATELY unplug the shore power cord (ALWAYS from the dockside outlet
first) and alert marina management.
1. Review all hazard information at the
beginning of this section, Shore Power.
2. Turn Off all breakers and switches on
the 110-volt AC master panel.
3. Attach the shore power cord(s) to the
yacht inlet(s) first, then to the dockside
outlet(s).
4. Switch the SHORE POWER 1 and/or
SHORE POWER 2 master breakers On.
5. As needed, turn On the individual com-
ponent breakers on the 110-volt AC
master panel.
Shore Power Cable Hoist (If
Equipped)
• The shore power cable hoist allows you
to easily feed out and reel in the shore
power cable.
• Before using the shore power cable hoist,
read the cable hoist manual.
90
!
WARNING!
SHORE POWER
BREAKER
SHORE POWER
INLET
441 Sedan • Owner's Manual
NOTE: SHOWN WITH OPTIONAL
CABLEMASTER.