Setup; Power; Initial Bluetooth Connection And Playing Audio; Previously Connected Devices - iLive IJBS90 User Manual

Karaoke singing stand
Table of Contents

Advertisement

Setup

Power

Plug the power adapter for the
karaoke machine into the DC
input on the back of the unit
and a standard wall outlet.

Initial Bluetooth Connection and Playing Audio

1. Power ON the karaoke machine by pressing the Power button. A voice will say, "Bluetooth is connecting," and
the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select IJBS90 in the Bluetooth Settings to pair. If need be, refer to
the user's manual of your specific device for more information.
3. When successfully paired, a voice will announce, "Bluetooth is connected," and the LED indicator will turn solid
blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust the volume level.
5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device
used. Note: If your device should become unpaired or you find it is unable to connect, press & hold the Play/
Pause/Pair button to enter to Pairing Mode. A voice will announce, "Bluetooth is connecting," and you can
connect to the speaker manually.

Previously Connected Devices

• The karaoke machine can remember multiple Bluetooth devices and will always try to reconnect to the last
device used.
• To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select IJBS90.

Troubleshooting

If the karaoke machine should become unpaired or will not connect normally, follow these steps in your
device's Bluetooth Settings Menu.
• Delete the karaoke machine ("Forget This Device").
• Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps.
10
IJBS90-2380-01-IB.indd 10
DC IN
DC IN
GUITAR IN
21/08/2019 10:04:56 AM

Advertisement

Table of Contents
loading

Table of Contents