Changing A Bulb - CITROEN GRAND C4 PICASSO 2009-2010 Manual

CHANGING A BULB

Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Front lamps
Model with halogen headlamps
1. Dipped beams (H7-55 W)
2. Main beams (H1-55 W)
3. Sidelamps (H6 W-6 W)
4. Direction indicators
(H21-21 W)
XI
174
P R A C T I C A L I N F O R M A T I O N
In some climatic conditions (e.g.
low temperature or humidity), the
presence of misting on the internal
surface of the glass of the head-
lamps and rear lamps is normal;
it disappears after the lamps have
been on for a few minutes.
The headlamps are fi tted
with polycarbonate
with a protective coating:
 do not clean them using a
dry or abrasive cloth, nor
with a detergent or solvent
product,
 use a sponge and soapy water,
 when using a high pressure
washer on persistent marks, do
not direct at the lamps or their
outlines for too long, so as not
to damage their coating and
their seals.
 Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a halogen bulb should
only be done after the headlamp
has been switched off for a few
minutes (risk of serious burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Dipped beam headlamps
glass
 Remove the rubber cover.
 Rotate the bulb-holder a quarter
 Replace the faulty bulb.
 Reposition the bulb-holder by
 Refi t the rubber cover.
Copyright CITROEN CITROEN CITROEN
turn anti-clockwise and remove it
from its housing.
pushing it in, tightening it by a
quarter turn clockwise.
compiled by C4owners.org