Using The Touchpad; Changing Channels By Entering Numbers - Samsung UE40F7000A Manual

Battery Low Alarm
If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears at the
bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for
longer usage.
Inserting the Batteries (AAA X 2)
1. Slightly lift the battery cover by pulling the strap or
using a plastic card. Next, pull on the cover's notch
with a fingernail to remove the cover completely.
Insert 2 AAA batteries, making sure to align the
2.
positive and negative ends correctly.
3. Align the battery cover with the back of the remote
control and press down along the edges until it is
cleanly attached to the remote control.

Using the Touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Drag on the touchpad in the desired direction.
Move the focus or the pointer in the direction the finger is dragging.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up
the numerical input window on the screen. Use your finger to enter the number for the channel
you want to watch. The recognised number is displayed on the screen and the TV switches to the
corresponding channel. See the e-Manual chapter, Controlling TV > Touchpad.
Numerical Input Guide
Refer to the diagrams below when entering numerical
values. The TV may not recognise your entries if you do
not follow the sequences shown below.
[UF7000-RU]BN68-04851L-00L04.indb 6
1
Dragging
HISTORY RY RY
HISTORY
HISTORY HISTORY
English - 6
2
HISTORY RY RY
HISTORY
Press on the touchpad. This selects the focused item. This selects the
focused item. When watching TV, pressing and holding the touchpad
displays the channel list. On some apps, pressing and holding the
touchpad for over 2 seconds displays a list of functions available for the
HISTORY HISTORY
3
Press
app.
HISTORY
2013-03-08 6:49:41