Acer Abidpx ED323QUR User Manual page 25

8. Blue Light: filter out blue light by adjusting different Blue Light showing
ratio - 80%, 70%, 60%, 50%
Note: Higher values allow more blue light through. For the best
protection, select a lower value.
9. ACM: Turn ACM on or off. The default is off.
10. Super Sharpness technology can simulate high-resolution images by
boosting the pixel density of the original source. It can make images
sharper and clear.
Adjusting the Color
1. Press the MENU key to open the OSD.
Toggle the joystick to the up or down to select Color from the OSD.
2.
Then toggle to the right to navigate to the element you wish to
adjust and press the joystick to enter it.
Toggle to the left or right to adjust the sliding scales.
3.
4. Gamma mode allows you to adjust the luminance tone. The default value
is 2.2 (standard value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Warm,
Bluelight or User.
6. sRGB mode is for getting better color matching representation with the
peripheral device, such as DSCs or printers.
6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
7.
6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan
8.
saturation.
.
13