Toyota 4Runner 1999 Owner's Manual page 102

Automatic transmission
"Two−wheel drive models
Lock release button
To prevent misshifting
Parking, engine starting
and key removal position
Reverse position
Neutral position
Normal driving position
Position for engine braking
Position for stronger engine
braking than that in "2"
position
With the brake pedal depressed, shift
while holding the lock release button
in. (The ignition switch must be in
"ON" position.)
Shift while holding the lock release
button in.
Shifting normally
Vehicles with cruise control When the cruise control is being used, even if you downshift the transmission by turning off the overdrive
switch, engine braking will not be applied because the cruise control is not cancelled. For ways to decrease the vehicle speed, see
"Cruise control" in this chapter.
4RUNNER (
Overdrive switch
For selecting either a three−speed or four−speed
transmission
ON position
OFF position
(Shifting into (Shifting into
overdrive
overdrive not
possible)
possible)
Driving pattern selector button
For selecting a driving pattern suited
to existing driving conditions
"NORM" (Normal) "PWR" (Power)
mode for general mode for
driving conditioning powerful
acceleration
)
O/D OFF indicator
light shows the
overdrive switch is
in OFF position
"PWR" mode indicator
light on the instrument
panel shows the driving
pattern selector button
is in the "PWR" mode
95