Page 3
Flymo Electric Lawnmower Turbo Lite 350 / Turbo 400 disabilities or a lack of experience and 1. SAFETY ................ 3 2. ASSEMBLY..............5 knowledge. Children must not be allowed 3. OPERATION ..............6 to play with the product. Cleaning and 4.
Page 4
4. Before use check the supply and extension cord for Connectors – Important signs of damage or aging. If the cord becomes • Flymo connectors are suitable for use with 2 core damaged during use, disconnect the cord from the cable only. Under no circumstances should these con- supply immediately.
Maintenance and storage Stop the engine, disconnect the mains and examine the cable for damage or ageing before you wind the cable for 1. Keep all nuts, bolts, and screws tight to be sure storage. Do not repair a damaged cable, replace it with the machine is in safe working condition.
To assemble the upper handle [ Fig. A2 ]: 3. Insert the nut into the handle knob 1. 1. Ensure the upper handle is located correctly with the 4. Fit the bolts, washers and handle knobs 2. lock-off button on the switchbox uppermost. 5.
Handle in operating position: 3. Start to mow the edge of the lawn nearest to the power point. Adjustment is not required to move the handle to the oper- So the cable is laid out on the lawn you have already cut. ating position.
The Flymo spare parts are available from your Flymo dealer v Replace the blade (see 3. OPERATION “To adjust the or from the Flymo service. cutting height”). Only use an original Flymo blade: Flymo Replacement Blade for TL350: reference no. FLY008. Part no. 512733490.
4 Pioneer Avenue, Tuggerah NSW 2259. Tel: 1300 804 213. new Flymo branded product produced by Husqvarna and purchased in Australia or New Zealand. To make New Zealand: This manufacturer’s warranty is in addition a valid claim under this manufacturer’s warranty the prod-...