Getting Started; Charging The Tablet - Venturer Challenger 10 Pro User Manual

Getting started

Charging the tablet

Use ONLY the included AC Adaptor to charge the
battery. The blue indicator blinks on the rear of the
tablet while the battery is charging and it will stop
blinking when it is fully charged.
To Wall
socket
AC Adaptor
(included)
IMPORTANT! Please Read.
We recommend fully charging your
tablet before using it for the first time.
For optimum per formance, please
connect the provided AC adaptor to
your tablet when it falls below 20%
charge.
Battery icon
The battery icon in the upper-right corner shows the
battery level or charging status.
Full
battery battery
Charging time will vary depending on remaining
b a t t e r y l i fe. C h a r g i n g f ro m 0% , s h o u l d t a k e
approximately 4-5 hours. Use ONLY the included AC
adaptor with the small round port. You may not be
able to turn on your tablet for at least 30 minutes if
the battery was fully drained.
NOTE
In order to keep the battery working in best condition,
please pay attention to the following:
• The included AC adaptor is for use with this unit only.
Do not use it with other equipment.
• Do not charge the battery in high temperatures.
• Do not wait for the battery to be fully depleted before
charging again. Keep the battery charged as needed.
- 2 -
Low Needs to
be charged
Charging