NSM–3/3D
Disassembly & Troubleshooting Instructions
1
3
4
Parts can be separated.
1.
Page 8
5.
5
6
2
6.
7.
8.
9.
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
To remove the PCB from the
housing remove the 6 screws.
NOTE: Here is shown the as-
sembly order.
NOTE: When assembling the
screws, use 17 Ncm torque.
Remove the PCB from B–cover.
Latch and latch spring can be separated
after removal of the left A–cover fixing.
1. When taking the PCB and UI mod-
ule apart remember the snap fixings
on both sides of the LCD.
NOTE: When assembling make
sure UI and PCB module edges
are fitted also correctly.
Remove the speaker
from its housing.
NOTE: Install allways
new speaker, old speaker
must not be used.
Issue 3 11/2000