Package Contents; Safety And Warnings - Cisco Meraki MX68 Hardware Installation Manual

Please note that the serial number is located on the product label at the bottom panel of MX75 devices

Package Contents

In addition to the MX device, the following are provided:
MX75
Power Adapter (No Power Cable)
2x CAT5 Ethernet Cables

Safety and Warnings

These operations are to be taken with respect to all local laws. Please take the following into consideration for safe operation:
• Power off the unit before you begin. Read the installation instructions before connecting the system to the power
source.
• Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents.
• Read the mounting instructions carefully before beginning installation. Failure to use the correct hardware or to
follow the correct procedures could result in a hazardous situation to people and damage to the system.
• This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective
device is rated not greater than: 15 A, 125 Vac, or 10A, 240 Vac.
• Please only power the device with the provided power cables to ensure regulatory compliance.
6