Frigidaire FPHD2491KF Service Data Sheet page 2

Color Code
BK............................. Black
BU...............................Blue
PK...............................Pink
RD...............................Red
WH/RD.............White/Red
RD-YE.............Red/Yellow
VT..............................Violet
OR.........................Orange
GR...........................Green
W..............................White
Water/Service Test
The water/service test is a
Special function initiated
from the power failure
mode or idle mode.
While in power failure
or idle mode -
simultaneously press the
AIR DRY and START/CANCEL
pads for 1 1/2 seconds.
The dishwasher will then
step through the test
cycle per the chart.
Pushing the START/CANCEL
pad will advance the
dishwasher to the next step.
Operation
LO. .........Low liquid in the rinse aid dispenser
PF ..........A power failure has occurred
Cd ..........Close the door
'01-24' ....Hour(s) delay before start
Display Codes (Readout)
CLEAN ------------------------ Shows completion of cycle.
OPTION LED's Flashing
LOW RINSE
(Some models)
SANITIZE ---------------------- The SANITIZED criteria has been met. Indicator light will go off 30 seconds after door is opened.
Wiring Diagram
Display Codes (LED)
Indicator light will go off 30 seconds after door is opened.
-- HI-TEMP WASH and AIR DRY/ LED's flashing indicates power failure has occurred. Press
START/CANCEL pad and reselect desired options and cycle.
------------------ The liquid rinse agent is low. Light will switch off after 5 complete wash cycles or dispenser is filled.