Contents Contents 1 Safety Precautions ..........................5 General safety information......................7 Commercial use only........................7 Symbols............................7 2 Program description ..........................8 General.............................8 Program description ........................8 3 Handling .............................9 Load ............................9 How to start the machine ......................10 Additional functions........................12 When program has ended ......................12 4 Error codes ............................13 5 Maintenance .............................13 General...........................13 Time for maintenance.......................13...
User manual 1 Safety Precautions • The machine is not to be used if industrial chemicals have been used for cleaning. • Do not dry unwashed items in the machine. • Items that have been soiled with substances such as cooking oil, ace- tone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the machine.
Page 6
User manual • When performing service or replacing parts, the power must be disconnected. • When the power is disconnected, the operator must see that the ma- chine is disconnected (that the plug is removed and remains removed) from any point to which he has access. If this is not possible, due to the construction or installation of the machine, a disconnection with a locking system in the isolated position shall be provided.
User manual way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Additional requirements for other countries: – This appliance is not intended for use by persons (including chil- dren) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given super- vision or instruction concerning use of the appliance by a person...
— different markets use different programs. The following program description is a short description of some exam- ples of programs that can be used. For a complete and detailed information about all the available drying programs, please refer to Electrolux web-site. It is recommended to follow the care labelling of the garment as far as possible.
User manual 3 Handling 3.1 Load Note! Remove all objects from pockets and make sure there are no metal objects such as screws, pins etc. left. Metal objects might cause damage to the drum. Load the goods into the machine according to recommendations and close the door. Make sure the filter is clean and clean if necessary.
User manual 3.2 How to start the machine Select program: Automatic programs Select program by turning the control knob. NORMAL EXTRA DRY EXTRA DRY NORMAL NORMAL IRON DRY IRON DRY Start the machine by pressing the control knob.
Page 11
User manual Time programs Select program by turning the control knob. NORMAL NO HEATING Start the machine by pressing the control knob. After start it is possible to change the time for the selected program. Turn the control knob to set the desired time.
User manual 3.3 Additional functions There is a menu with additional functions available for selection after start. When pressing the control knob / start but- ton (on machines without control knob) the menu will appear on the display. Select from the menu by turning the control knob / pressing the up and down buttons and press the control knob / start button to activate.
User manual 4 Error codes A fault in the program or in the machine is indicated by an error code on the display. Some of these error codes can be solved easily without contacting service personnel. Error Text Cause/Action code 12:11 DRYING ERROR WITH RMC The longest permitted RMC time has been exceeded.
User manual 5.3 Every day Check that the machine does not operate with the door or filter door open, if so, the machine must be placed out of order until repairs are made. Note! Contact qualified service personnel to disconnect power from the affected machine. Clean the door, door gasket and other external parts.
User manual 5.4 Fresh air intake At regular basis, check that the fresh air intake on the front of the machine is not clogged by lint and dust or otherwise blocked. Clean with a vacuum cleaner. fig.7386 5.5 Machines with residual moisture control (RMC) At regular basis, wipe off/clean drum and lifters with citric acid (Acidum citricum).
User manual 6 Disposal information 6.1 Disposal of appliance at end of life Before disposing of the machine, make sure to carefully check its physical condition, and in particular any parts of the structure that can give or break during scrapping. The machine’s parts must be disposed of in a differentiated way, according to their different characteristics (e.g.
Page 20
Electrolux Professional AB 341 80 Ljungby, Sweden www.electrolux.com/professional Share more of our thinking at www.electrolux.com...