Troubleshooting Suggestions - Wells HT200 Owner's Manual

TROUBLESHOOTING SUGGESTIONS

SYMPTOM
No power to warmer
Warmer will not heat
Warmer trips circuit breaker
Warmer slow to heat
There are no user-serviceable components in this appliance.
In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
POSSIBLE CAUSE
Circuit breaker off or tripped
Unit not plugged in
Temperature control not set
Internal damage
Tank leaking or other internal
damage
Internal damage
Mineral deposits on tank acting
as a insulator
Connected to wrong voltage
Too much water
10
SUGGESTED REMEDY
Reset circuit breaker
Make sure unit is plugged in to
power receptacle
Set control to desired temperature
Contact you Authorized Wells
Service Agency for repairs
Contact your Authorized Wells
Service Agency for repairs
Contact your Authorized Wells
Service Agency for repairs
Clean tank with delime cleaner
Verify supply voltage - must match
voltage on warmer nameplate
Remove water from pan until 1" of
water remains in tank