Bad Boy COMPACT OUTLAW BBO42FX691 Owner’s Operator Service Manual page 18

TRANSAXLE BYPASS
Under the rear of the mower, you will find the two rods shown in Fig. 11. These neutral bypass rods serve as a
neutral for moving the mower while the engine is not running. Pull the rods out and lock them into place, using
the cotter pin, to activate the bypass.
Fig. 11
Cotter Pin
TRACKING ADJUSTMENT
When adjusting the tracking on the mower, the length of the pushrods can be changed by screwing the swivel
joint in or out on the ends of the rods. Shortening the overall length of the rod slows the transaxle down.
Lengthening the rod will increase the speed of the transaxle.
Fig. 12
Left Push Rod End
PAGE 18
Neutral Bypass Rods
Cotter Pin
Fig. 13
Right Push Rod End