Troubleshooting
4-4 Buyer-Region Code Setting Method
4-4-1 The inserting method of Region Code after replacing the Main PBA
[Reference]
- When replacing the Main PBA and System Micom should be inserted the region code.
- The set is not working properly if you don't insert the region code.
- The region code is inserted by the remote control.
1. Press the "AUX" button on the remote control.
2. Press the "ANGLE" button on the remote control during 4~5
seconds.
3. After step (2), you can see "TEST − −" on the VFD.
Insert number "33", "33" to select Region Code.
4. After step (3), you can see "− −" on the VFD.
Insert the Region Code corresponding model with
"0 ~ 9" buttons on the remote control.
5. Turn the Power off.
4-8
TEST − −
− −
Samsung Electronics