Panasonic UT-MB5000 Series Operating Instructions Manual page 7

NOTE
l PC Information Viewer
This computer periodically records the management information of the flash memory, etc. The
maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause when the flash memory goes down by
any possibility. They are never sent to outside via network nor used for any other purpose
except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
(è Reference Manual "Checking the Computer's Usage Status")
l In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may
delete the icon if not necessary.
l Note that the computer consumes electricity even when the computer power is off. If the built-
in battery is fully charged, the battery will fully discharge in the following period of time:
Status
When power is off Approx. 4 weeks
In sleep
In hibernation
l If "Get online" is displayed, select "Skip this step".
You can set the Wireless Network after the setup of Windows
is complete.
CAUTION
l You can change the user name, password, image and security
setting after setup of Windows.
l Remember your password. If you forget the password, you can-
not use Windows. Creating a password reset disk beforehand is
recommended.
l Do not use the following words for user name: CON, PRN, AUX,
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space.
In particular, if you create a user name (account name) that
includes the "@" mark, a password will be requested at the log-
on screen, even if no password has been set. If you try to log
on without entering a password, "The user name or password is
incorrect." may be displayed and you will not be able to sign in
(è page 21).
5 Set the time zone, and then set the date and
time.
A Flick from the middle of the Start screen to the top, and then
touch [Control Panel] under "Windows System".
B Touch [Clock, Language, and Region] - [Date and Time].
C Touch [Change time zone...].
D Select the time zone, then touch [OK].
E Touch [Change date and time...], then set the date and time.
6 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory
default condition, in case, for example, the recovery partition
of the flash memory is damaged. We recommend creating a
recovery disc before you begin using the computer.
Refer to è
ity" about creating the disc.
Discharge period
Approx. 3 days
Approx. 4 weeks
Reference Manual "Recovery Disc Creation Util-
7