Table of Contents
Advertisement
5. Connect the speaker's audio cable and audio jack of monitor to transfer audio source
from HDMI/DP.
Note: The audio output in HDMI/DP modoes.
6. Insert the power cord into the monitor, then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord according
to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 )
shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
(designation H05RR-F 3G 0.75mm2 ) shall be used.
2
1
2
1
Chapter 1.Getting started 1-6
Hide quick links:
Advertisement
Table of Contents
