Power Off - Sylvania SLTDVD9220-C Instructions Manual

1.2Buttons
Volume - +
Press - / + to adjust volume.
Power button
Power on
Long press 2~3 seconds, screen will light up and pictures will show up until
the interface page.

Power Off

In tablet Mode long press
to shut off the unit. (Note: This feature does not apply to DVD mode, it needs
exit to tablet mode.)
Reboot
Long press ,it will show Power off , Reboot , choose Reboot ,to reboot the unit.
Sleep mode (only in tablet mode)
In boot mode, when tapping
turns off, which can save power.
Tap again to go back and light up screen for further operation.
Open loader
Pull left, user can open the loader and take in or out the disc.
Lock and unlock the screen
LOCK
You can setup sleep time in the Settings, choose Display.
The system will enter into sleep mode automatically and lock the screen to
standby mode, if without operating exceeding preset time.
UNLOCK
If screen light on, just drag
If screen is on sleep mode, then press
application interface.
1.3Connections
Earphone jack:
Micro USB jack:
latter, require an additional OTG cable which is not included in this device.)
HDMI jack:
video quality. (This requires a separate HDMI cable, which is included in this device.)
TF card slot:
RESET:
To restart the system if abnormal situation happen and the device can't
be turned down. Use a thin object (like the end of a paper clip) to press RESET,
located in the middle of the right side, the device will be reset and power turns off.
Press 6~8 seconds to shut off the unit.
MIC:
To record if turned on recording function.
it will show Power off , Reboot ,choose
,the system will go into standby mode with screen
to unlock the screen and enter application interface.
To connect external earphone
For both power supply input and connecting with PC (for the
To show video to another TV with HDMI to achieve high resolution
now known as Micro SD type, to insert a Micro SD per instruction.
and drag to unlock the screen and enter
6
Power off .