7.4 Pressure Drop and Water Flow Curves
Figure 98
The chart below applies only to incoming water temperatures of 70°F (21°C) or less. For incoming water
temperatures greater than 70°F (21°C), please contact Rinnai.
RUR199
RUR160
Figure 99
Rinnai Tankless Water Heater Installation and Operation Manual
Dashed lines represent flow rate
after parameter adjustment.
Dashed lines represent flow rate
after parameter adjustment.
Delta T - Temperature Rise (°F)
Water Flow (GPM)
NOTE: Maximum flow rates may vary based
on set temperature, Delta T and altitude.
RUR199
RUR160
91