Packaging, Transport And Storage - Siemens SITRANS L Series Operating Instructions Manual

Description
3.4 Packaging, transport and storage
4
Figure 3.4
3.4

Packaging, transport and storage

Packaging
Your transmitter was protected by packaging during transport. Its capacity to handle
normal loads during transport is assured by a test based on ISO 4180.
The packaging consists of environment-friendly, recyclable cardboard. For special
versions, PE foam or PE foil is also used. Dispose of the packaging material via
specialised recycling companies.
Transport
Transport must be carried out in due consideration of the notes on the transport
packaging. Nonobservance of these instructions can cause damage to the device.
Transport inspection
The delivery must be checked for completeness and possible transit damage
immediately at receipt. Ascertained transit damage or concealed defects must be
appropriately dealt with.
Storage
Up to the time of installation, the packages must be left closed and stored according
to the orientation and storage markings on the outside.
Unless otherwise indicated, the packages must be stored only under the following
conditions:
•
•
•
•
•
Storage and transport temperature
•
•
10
Handheld
Connecting the PC to the signal cable
Not in the open
Dry and dust free
Not exposed to corrosive media
Protected against solar radiation
Avoiding mechanical shock and vibration
Storage and transport temperature see chapter " Supplement - Technical data
-Ambient conditions"
Relative humidity 20 ... 85 %
SITRANS LR120
Operating Instructions, 08/2020, A5E49829026