Dell Inspiron 7501 Service Manual page 48

Steps
1. Place the DC-in port on the palm-rest and keyboard assembly.
2. Replace the single screw (M2x3) that secures the DC-in port to the palm-rest and keyboard assembly.
3. Connect the DC-in port cable to the system board.
4. Using the alignment posts, close the left display hinge.
5. Replace the two screws (M2.5x5) and (M2.5x4) that secure the left display hinge to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in after working inside your computer.
48 Removing and installing components