Storage Interface
4 x SATA 6Gb/s connectors, integrated in the Chipset:
-
Support for RAID 0, RAID 1, and RAID 10
USB
CPU:
-
2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
-
2 x USB 3.2 Gen 1 ports on the back panel
Chipset:
-
2 x USB 3.2 Gen 1 ports on the back panel
-
2 x USB 3.2 Gen 1 ports available through the internal USB header
-
2 x USB 2.0/1.1 ports on the back panel
Chipset+USB 2.0 Hub:
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
2 x M.2 Socket 3 connectors
4 x SATA 6Gb/s connectors
1 x CPU fan header
1 x water cooling CPU fan header
3 x system fan headers
1 x CPU cooler LED strip/RGB LED strip header
2 x addressable LED strip headers
2 x RGB LED strip headers
1 x front panel header
1 x front panel audio header
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x Clear CMOS jumper
Back Panel
1 x DisplayPort
Connectors
1 x HDMI port
2 x USB 3.2 Gen 2 Type-A ports (red)
4 x USB 3.2 Gen 1 ports
2 x USB 2.0/1.1 ports
1 x Q-Flash Plus button
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks
I/O Controller
iTE
I/O Controller Chip
®
Hardware
Voltage detection
Monitor
Temperature detection
Fan speed detection
Water cooling flow rate detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
- 8 -