Power Management - Dell Latitude 5500 Setup And Specifications Manual

Power management

Option Description
AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.
Enable Intel Speed
•
Shift Technology
Default setting: Enabled
Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are:
•
•
•
•
Default setting: Disabled
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
•
Wireless Radio If Enabled, this feature will sense the connection of the system to a wired network and subsequently disable the
Control selected wireless radios (WLAN and/ or WWAN).
•
Wake on LAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.
•
•
•
Default setting: Disabled
Block Sleep This option lets you to block entering to sleep in OS environment. When enabled system won't go to sleep.
Block Sleep - is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•
•
Advanced Battery This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge charging algorithm and other techniques, during the non work hours to improve the battery health.
Configuration
Enable Advanced Battery Charge Mode- is disabled
Primary Battery Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
34 System setup
Enable Intel Speed Shift Technology
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Control WLAN radio - is disabled
Disabled
LAN Only
LAN with PXE Boot
Enable peak shift—is disabled
Set battery threshold (15% to 100%) - 15 % (enabled by default)
Adaptive—enabled by default
Standard—Fully charges your battery at a standard rate.
ExpressCharge—The battery charges over a shorter time using Dell's fast charging technology.
Primarily AC use
Custom
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable
the Advanced Battery Charge Configuration option.