Kenmore 790.7443 Series Use & Care Manual page 17

Setting Clock
When the appliance is first powered up or when the power sup-
ply to the appliance has been interrupted, 12:00 will flash in
the display. The time of day must first be set before operating
the oven.
To set the clock
1. Press Set Clock once. CLO appears in display.
2. Press or and the time appears in the display.
Continue to hold arrow key until the correct time of day
appears in the display.
3. Press START to accept time of day.
Important note:
The time of day cannot be changed when the oven is set for
cooking.
Changing Temperature Display (ºF or ºC)
The electronic oven control is set to display °F (Fahrenheit) when
shipped from the factory. The display may be changed to show
either Fahrenheit or ºC (Celsius) oven temperatures.
To change temperature display mode from °F to °C or from
°C to °F
1. Press Broil. HI appears in the display.
2. Press and hold Broil until F or C appears in the display.
3. Press either or
choices.
4. Press START to accept change. The display will return to
the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is set for cooking.
to toggle between F or C mode
Changing between continuous bake setting or 12-Hour
Energy Saving feature
The oven control has a factory-preset 12-Hour Energy Saving
feature that will turn the oven off automatically if the oven is
left on for more than 12 hours. The control may be programmed
to override this feature to continuously bake.
To change to continuous bake mode
Press and hold Timer Set/Off until the control beeps once
(about 6 seconds). - - hr will appear in display. The control is set
for continuous bake setting.
To change to 12-Hour Energy Saving feature:
Press Clean to toggle between continuous and 12hr energy
saving modes. Press START to select desired setting.
Oven Lock
The OVEN LOCK feature allows you to lock the oven portion of
the appliance while the oven is not in use.
To activate OVEN LOCK feature:
1. Be sure the door is completely closed.
2. Press and hold OVEN LOCK for 3 seconds. Loc will
appear in the display. The OVEN LOCK indicator light will
flash while the motor driven door latch begins locking the
oven door. Do not open the door during this time. Allow 15
seconds for the door to completely lock. Once oven door is
locked, the time of day will appear in the display.
To cancel the OVEN LOCK feature
1. Press and hold OVEN LOCK for 3 seconds. The OVEN
LOCK indicator light will flash and the motor driven door
latch will begin to unlock. Do not open the door at this time.
The door will unlock completely in about 15 seconds.
2. The oven control keys will be available and the oven door
can be opened again.
Important notes:
• To avoid possible damage to the oven door latch
mechanism, do not attempt to open of close the oven door
whenever the OVEN LOCK indicator light is flashing.
• If a control key is pressed when the OVEN LOCK is active,
Loc will appear in the display as a reminder that the oven
keys are inactive when the OVEN LOCK feature is active.
17
Oven Controls