Power Adapters; Hardware Installation; Cisco Video Surveillance 8620 Ip Camera Hardware Installation - Cisco 8620 Reference Manual

Chapter 1 Getting Started
8
9
10 Reset button
11 MicroSD card slot

Power Adapters

Figure 1-5 Power Adapters
CIVS-IPC-8620 This product is intended to be supplied by a UL Listed Power Adapter with LPS output,
rated 24 Vac, 0.86 A min., 50-60 Hz or 12 Vdc, 0.9 A min. or PoE 37-57 Vdc, 0.33-0.22 A.
CIVS-IPC-8620-S
CIVS-IPC-8630 This product is intended to be supplied by a Listed Power Adapter with LPS, rated PoE
37-57Vdc, 0.67A-0.44A or 12Vdc, 1.63A or 24Vac, 0.91A, 50-60Hz.
CIVS-IPC-8630-S

Hardware Installation

The following sections describe how to install your camera:
•
•

Cisco Video Surveillance 8620 IP Camera Hardware Installation

To perform the hardware installation of the Cisco Video Surveillance 8620 IP Camera, follow these
steps:
Make a note of the MAC address of the camera.
Step 1
The MAC address is printed on the label that is attached to the camera.
Remove the dome cover by pressing the release button.
Step 2
Lens
Microphone connects
Cisco Video Surveillance 8620 IP Camera Hardware Installation, page 1-5
Cisco Video Surveillance 8630 IP Camera Hardware Installation, page 1-9
Cisco Video Surveillance 8620/8630 IP Camera Reference Guide
Power Adapters
1-5