Using The Personal Protection Alarm; User Selectable Notification Chirps; User Selectable Led; Programmed Transmitter Notification - Prestige PE5BZ Owner's Manual

Apsrs rf upgrade kit

Hide thumbs Also See for PE5BZ:

Table of Contents

Activating the AUX Ch. 4-7 Output (Optional)

AUX channel output is an optional feature and programming is required at the time of

installation. Please consult your dealer for more information.

Using the Personal Protection Alarm (Panic)

Press and hold the

alarm. During panic mode, the normal function of the transmitter buttons will be

suspended. The transmitter's

(if the option is installed). To stop the alarm, press and hold the

transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

Turn the ignition ON then OFF.

Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

This feature will control whether the LED is ON or OFF when the system is Armed/

Locked and can be toggled ON or OFF without entering the programming feature

banks.

Turn the ignition ON, OFF, ON, OFF.

Press and hold the valet/programming button for 5 seconds. The system

LED will respond with 1 flash for ON or 2 flashes for OFF.

As a security precaution each time the vehicle's ignition is turn on the status LED

light with flash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

button for 3 seconds to activate the personal protection

and

buttons can be used to lock and unlock the door

button on the

APSRS PE5BZ Owners revB

Table of Contents