Configuring virtual domains
Configuring IPSec VPN for a virtual domain
142
To configure VPN for a virtual domain
The following procedure applies to NAT/Route and Transparent mode.
1
Go to System > Virtual domain > Virtual domains.
2
Select Change following the current virtual domain name above the table.
3
Choose the virtual domain for which to configure VPN.
4
Select OK.
5
Go to VPN.
6
Configure IPSec VPN, PPTP, L2TP, and certificates as required. See
page
247.
01-28006-0092-20041105
System virtual domain
"VPN" on
Fortinet Inc.