400 Mhz Bi-Directional Amplifier Uplink Specification; 800 Mhz Bi-Directional Amplifier Downlink Specification - Andrew AE04A-D1248-001 Operation & Maintenance Manual

Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-output carriers at +20.0 dBm/C (+19.0
dBm/C for RF Fed BDA) at 483.1625 MHz and 483.2375 MHz with a BDA gain setting
of 48 dB.

3.2.2 400 MHz Bi-Directional Amplifier Uplink Specification

PARAMETER
Operating Frequency Range
Pass Bandwidth
Gain Typical
Output Gain Adjustment
Composite Output Power
Composite Input Power
(With ALC Activated)
Impedance
VSWR
2
OIP3
Noise Power max. @ 48 dB Gain
AC Power
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-input carriers at – 48 dBm/C (-30 dBm/C
for RF Fed BDA) at 486.1625 MHz and 486.2375 MHz with a BDA gain setting of 48
dB.

3.2.3 800 MHz Bi-Directional Amplifier Downlink Specification

PARAMETER
Operating Frequency Range
Pass Bandwidth
Gain Typical
Output Gain Adjustment
Power Output @ 16 Carriers
Power Output @ 8 Carriers
Composite Output Power
Composite Input Power
Impedance
VSWR
DWG NO: AE04B-A1669
486.1625 – 486.2375 MHz
75 kHz
48 dB
1
30 dB
+5 dBm max.
-14 dBm max.
50 Ohms
2:1
+ 26 dBm (+44 dBm; RF Fed BDA)
-110 dBm/Hz
120 VAC Single Phase
851 – 856 MHz
5 MHz
48 dB
1
30 dB
+11.1 dBm/C
+16.8 dBm/C
+30 dBm max.
-18 dBm max.
50 Ohms
2:1
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
Rev: B
UPLINK SPECIFICATION
DOWNLINK SPECIFICATION
Amplifier Operations / Maintenance Manual
Date: 06/18/2008 10 of 63
Page: