Related Manuals for Pyle PLCMH6
Summary of Contents for Pyle PLCMH6
- Page 2 Introduction Thank you for purchasing the wireless camera and monitor hitch kit. The camera features an image sensor and a transmitting module to capture the image and transmit picture wirelessly. The receiver features a receiving module to receive and display the camera image on a color LCD - liquid crystal display. System works at 2.4GHz frequency band, which could be legally used worldwide without permission.
- Page 3 Important 1. Do not shake or strike the product; 2. Keep it dry and dustless and avoid exposing it to direct sunlight; 3. Avoid putting the product in places where the constantly changed temperature or humidity occurs; 4. Keep product away from heat sources such as electric heater; 5.
- Page 4 Camera Camera Indicator Lights CAMERA LED INDICATOR STATUS Charging when Powered off Power off (disconnect with cigarette lighter)/Finish Charging Green Power on Yellow Charging when Power on Charging the Camera and Receiver 1. Load a Li-battery to the battery compartment with its polarities matched. 2.
- Page 5 Display Display LED Indicators RECEIVER LED INDICATOR STATUS Charging when Powered off Power off (disconnect with cigarette lighter)/Finish Charging Green Power on, working at reverse image Yellow Charging when Power on, working at reverse image Green Flashing Working at non reverse image Yellow Flashing Charging and working at non reverse image Troubleshooting...
- Page 6 Quick Setup Guide Wireless Backup Rearview Trailer Hitch Camera Model: PLCMH6 1. Ensure the Camera and Monitor system are fully charged before use. Charging time approx. 4 hours. The system comes with a cigarette lighter/outlet accessory charging cable with two different connector jacks, to charge the camera and monitor independently.