Siemens C75 Service Manual page 24

C75 Level 2 Service Manual
10.1 Mobile Software Updating
The software of the mobile, 75 series is loaded from a PC directly. Hardware
interconnection between the mobile and the PC is shown in Figure 1. Because of the new
type of external connector used in X55 series (Slim-Lumberg type) an additional adaptor
cable between mobile and boot adaptor is required. Table 1 listed all the hardware
requirements
If you use the battery dummy, make sure that the power supply voltage is correctly
adjusted.
Description
Bootadapter 2000 incl. AC-Adapter, serial
cable and mobile connection cable
IBM Compatible PC – Pentium
Adapter cable – Slim Lumberg to Old
Copyright © Siemens Pte Ltd.
All Rights Reserved
COM D CCQ APAC SLI
TABLE 1. EQUIPMENT LIST FOR SOFTWARE PROGRAMMING
Page 24 of 40
Part No.
L36880-N9241-A200
-
F30032-P226-A1
Siemens Technical Support Centre
Internal Use Only