Replacing the hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard
drive.
Procedure
1
Align the screw holes on the hard-drive bracket with the screw holes on the hard
drive.
2
Replace the four screws (M3x3) that secure the hard-drive bracket to the hard
drive.
3
Connect the interposer to the hard-drive assembly.
4
Align the screw holes on the hard-drive assembly with the screw holes on the
palm-rest assembly and keyboard shield.
5
Replace the three screws (M2x3) that secure the hard-drive assembly to the
palm-rest assembly and keyboard shield.
6
Connect the hard-drive cable to the connector on the system board.
Post-requisites
Replace the
base
24
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before